Hospitals Use Aleddra's 2-in-1 Emergency LED T8 and T5 Tubes to Add Instant Emergency Lighting

Emergency lighting is a must for all hospital facilities, but the solutions thus far are backup power generators and standard "non-attractive" emergency light fixtures. During a power outage, it takes 4 to 8 seconds before the generators starts and activates that emergency circuit light.

Backup generators have a fixed capacity and provide emergency power to a fixed number of lights and equipment, thus are not scalable for adding more emergency light fixtures.

Today, hospital facility and physical plant managers have available a NEW type of Automatic Self-Test (30 seconds monthly & 90 minutes annually) and Self-Diagnostic (notifies customer when the tubes are in test mode and when it needs to be replaced) emergency lighting that they can quickly and easily install in all their facilities. In addition, the Self-Testing and Self-Diagnostic features will save the facility time and money by eliminating the monthly audits.

Aleddra's Gen4 Emergency LED T8 and T5 Tubes are the NEW additions to the emergency lighting products that are available to medical facilities across the United Stated. The Gen4 EM T8 and T5 emergency tubes Operate like a standard LED tube, that can be turned ON/OFF and when there is a power interruption it goes into an emergency mode. The internal lithium battery provides 90 minutes of emergency lighting. The Aleddra G4 tubes eliminate the 4 to 8 second delay issue and can be installed in areas that additional emergency lighting may be required or needed.